NEXI-YK-1 explosion-proof digital pressure gauge Definition

The Nexisense YK-1 explosion-proof digital pressure gauge is a high-performance pressure measurement instrument launched by Nexisense, designed specifically for industrial environments that require high precision and safety. This device utilizes advanced imported sensor technology to provide accurate pressure measurements under extreme conditions, widely applied in the oil, chemical, and power industries.

Principle

The working principle of the Nexisense YK-1 explosion-proof digital pressure gauge is based on the piezoelectric effect and resistance strain principle. When pressure is applied to the measured medium, the piezoelectric material or resistance strain element inside the sensor generates a small electrical signal. These signals are amplified and converted by the signal processing circuit, ultimately displayed in digital form on the screen. This process ensures high precision and rapid response.

Structural Analysis

The structural design of the Nexisense YK-1 explosion-proof digital pressure gauge focuses on safety and durability. Its main components include:

1. Sensor: Uses imported high-precision sensors with corrosion and shock resistance.

2. Signal Processing Circuit: Utilizes ultra-low power processors and signal processing chips to ensure efficient data processing.

3. Display Screen: 5-digit dynamic display for intuitive readings.

4. Power Management: Powered by a large-capacity lithium battery with a lifespan of 2 to 3 years, supporting charging functionality.

5. Housing: Explosion-proof design to ensure safe use in hazardous environments.

Advantages

The Nexisense YK-1 explosion-proof digital pressure gauge has several notable advantages:

• High Precision: Achieves measurement accuracy of 0.05 level, suitable for precision pressure measurement.

• Anti-Interference Capability: Exhibits good shock and vibration resistance, suitable for harsh environments.

• Portability: Built-in lithium battery requires no external power supply, convenient for field use.

• Versatility: Can be used for calibration and verification of general pressure gauges, precision pressure gauges, and pressure transmitters.

NEXI-YK-1 explosion-proof digital pressure gauge Application Scenarios

The Nexisense YK-1 explosion-proof digital pressure gauge is widely used in various industries, including:

• Oil and Gas: Used for pressure monitoring and control in oil wells.

• Chemical: Monitors reaction pressure during chemical processes.

• Power: Monitors pressure status of power generation equipment to ensure safe operation.

• Food and Pharmaceutical: Monitors pressure during production processes to ensure product quality.

Measurement Methods

The Nexisense YK-1 explosion-proof digital pressure gauge supports various pressure measurement methods, including:

• Gauge Pressure: Measurement relative to atmospheric pressure.

• Absolute Pressure: Measurement relative to vacuum, suitable for high-precision requirements.

Maintenance and Care

To ensure the long-term stable operation of the Nexisense YK-1 explosion-proof digital pressure gauge, it is recommended to perform the following maintenance and care regularly:

1. Regular Calibration: Conduct annual calibration to ensure measurement accuracy.

2. Cleaning: Regularly clean the housing and display screen to prevent dust and dirt from affecting readings.

3. Battery Check: Regularly check the lithium battery's charge, replacing or recharging as necessary.

4. Explosion-Proof Inspection: Regularly inspect the explosion-proof housing to ensure no damage.

NEXI-YK-1 explosion-proof digital pressure gauge Technical Parameters

• Measurement Range: -0.1-60MPa (selectable range)

• Accuracy Level: 0.4% F.S, 0.2% F.S

• Power Supply: 3.6V lithium battery, lifespan of 2 to 3 years or rechargeable battery

• Medium Temperature: 20~80°C

• Ambient Temperature: -10~60°C

• Ambient Humidity: ≤80% RH

• Thread Interface: M20×1.5 (other threads need to be specified when ordering)

FAQ

Q1: In which industries is the Nexisense YK-1 explosion-proof digital pressure gauge suitable for use?

A1: This pressure gauge is widely used in the oil, chemical, power, food, and pharmaceutical industries.

Q2: How do I choose the appropriate measurement range?

A2: Select the appropriate measurement range based on actual application needs to ensure measurement accuracy and safety.

Q3: What is the battery life of the YK-1?

A3: The lithium battery equipped with the YK-1 has a lifespan of 2 to 3 years and supports charging functionality.

Conclusion

The Nexisense YK-1 explosion-proof digital pressure gauge, with its high precision, anti-interference capability, and portability, is an ideal choice for industrial pressure measurement. Whether in the oil, chemical, or power industries, the YK-1 explosion-proof digital pressure gauge can provide reliable pressure measurement solutions. Through regular maintenance and calibration, users can ensure the long-term stable operation of the device, thereby enhancing work efficiency and safety. Choose Nexisense YK-1 to make your pressure measurement work more efficient and safer.